Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-02-2014, 09:47 PM
bobr338 bobr338 is offline
Senior Member
 
Join Date: Jan 2010
Posts: 101
Default Want to buy: Aluminum Transom Support Plate 20sf

Hi guys, looking to put a plate on my 20sf to buy a few seasons, the transom isnt 100% but no serious flex yet. Figured i would check in and see if anyone in the northeast has one kicking around prior to a refurb? If not i have a few local options to have one made. Thanks!
__________________
Scituate Mass

1976 SeaCraft SF23
Reply With Quote
  #2  
Old 08-03-2014, 01:07 AM
FishStretcher FishStretcher is offline
Senior Member
 
Join Date: Dec 2010
Location: Greater Boston
Posts: 1,117
Default

I "plated" mine with 5 feet of 6063 aluminum c channel. It works great. I think I listed mcmaster carr P/N for the channel somewhere.

http://www.classicseacraft.com/commu...hlight=channel

I think it was under $60 shipped.
Reply With Quote
  #3  
Old 08-03-2014, 02:07 PM
caboman22 caboman22 is offline
Member
 
Join Date: May 2012
Location: Manahawkin,NJ
Posts: 76
Default

I have a ss plate that was custom made for my boat by the previous owner.. It slides right over the transom it's real sweet... It was off of a 23sf 1974.. Pm me if interested and I can take a few pics...I'm in NJ

TKS..
Reply With Quote
  #4  
Old 08-03-2014, 11:22 PM
deepsushi deepsushi is offline
Senior Member
 
Join Date: Mar 2002
Location: Massachusetts
Posts: 163
Default

I have a support made from diamond plate that was on a 18 . Don't know if would fit a 20. Located on Cape Cod
Reply With Quote
  #5  
Old 08-04-2014, 11:33 AM
tuckerman tuckerman is offline
Recovered
 
Join Date: Nov 2013
Posts: 24
Default Transome plate

I have one I'm in CT. PM me for info
Reply With Quote
  #6  
Old 08-04-2014, 08:43 PM
tuckerman tuckerman is offline
Recovered
 
Join Date: Nov 2013
Posts: 24
Default Transom

Here's a pic it's @38" wide
Attached Images
 
Reply With Quote
  #7  
Old 08-04-2014, 08:48 PM
tuckerman tuckerman is offline
Recovered
 
Join Date: Nov 2013
Posts: 24
Default Transome

Here's a pic from the inside. It held a 150 4 stroke yamaha on a broken Transome .
Attached Images
 
Reply With Quote
  #8  
Old 08-04-2014, 09:02 PM
bobr338 bobr338 is offline
Senior Member
 
Join Date: Jan 2010
Posts: 101
Default

Unfortunately i am showing the engine well section of the transom to be around 24-25 across. Surprising that an MA was that much wider! Either that or I am missing something, highly likely...
__________________
Scituate Mass

1976 SeaCraft SF23
Reply With Quote
  #9  
Old 08-04-2014, 09:11 PM
tuckerman tuckerman is offline
Recovered
 
Join Date: Nov 2013
Posts: 24
Default Plate

Your correct the opening on the MA is much bigger. I just measured the almost famous red SF in my shop. ( Bryan A 's ) The plate is alumn and could be cut with a saws all or jig saw.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:38 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft