Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > General
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 06-13-2008, 02:18 PM
mrburnsjr mrburnsjr is offline
Junior Member
 
Join Date: Jul 2004
Location: MA
Posts: 2
Default Trailer for 20 ft Seafari

Can anyone recommend a good trailer for my 1972 20ft Seafari? I think the current trailer has finally had it.
Thanks!
Reply With Quote
  #2  
Old 06-13-2008, 05:23 PM
Bushwacker Bushwacker is offline
Senior Member
 
Join Date: Feb 2007
Location: N. Palm Beach, Fl.
Posts: 2,456
Default Re: Trailer for 20 ft Seafari

If you want a roller trailer, which I prefer because you can launch on almost any kind of ramp, it's hard to beat the single axle EZ loader 6M, 3100 lb capacity, or 3500# w/ 16.5" dia rims.


Have had this one for over 20 years; only thing that gets wet are the tires and maybe the center of rear cross member, so that eliminates a lot of problems, and allows use of BIG drum brakes for lots of swept area and stopping power. I have removed the side rollers since this picture was taken. The outer rollers run right along the outside vertical step and center the boat perfectly every time. Easy to load and unload if you use a power winch. It is a heavy trailer though, at about 900 lbs; I believe the aluminum float-on types are about 500#. The black OEM rollers will leave black marks on the hull, so I'd negotiate with dealer to install the new style yellow poly rollers which don't leave marks before I bought one however.
__________________
'72 SeaFari/150E-Tec/Hermco Bracket, owned since 1975.
http://i188.photobucket.com/albums/z...Part2019-1.jpg
Reply With Quote
  #3  
Old 06-14-2008, 01:04 AM
eggsuckindog eggsuckindog is offline
Senior Member
 
Join Date: Mar 2003
Location: Tampa
Posts: 2,354
Default Re: Trailer for 20 ft Seafari

Aluminum Float on style is just so fricken easy its scary - mine is a Fast Load made down here in Plant City Fl- another great trailer is Owens and Sons in St Pete, not sure if they have dealers that far. Best style trailer I ever owned, hell Danny (Snooknerd) could even load a boat on one.
__________________
Any way you measure it - dumbass is expensive
Reply With Quote
  #4  
Old 06-14-2008, 10:33 AM
Blue197320 Blue197320 is offline
Senior Member
 
Join Date: Mar 2006
Location: Miami Fl
Posts: 947
Default Re: Trailer for 20 ft Seafari

i have a tandem axel aluminum float on trailer. i just put some forward center bunks on it. that made it even easier to load the boat on the trailer. if i can load it and unload it with my girl friend i think anyone can do it. i think roller trailers will take longer to load at a crowded ramp. but i might be wrong.
Reply With Quote
  #5  
Old 06-14-2008, 11:09 AM
castalot castalot is offline
Senior Member
 
Join Date: Mar 2008
Location: portsmouth rhode island
Posts: 686
Default Re: Trailer for 20 ft Seafari

i would say buy a roller trailer for new England ramps as you know they can suck get as many rollers as possible to support the boat and make loading and unloading easier also make sure the trailer is self centering ( no roller to hit in the middle) i have had two 5star trailers and love them get disc brakes and if possible torsion axles the ride is super smooooth most new trailers are poly rollers
hope that helps
__________________
we need a lifeguard at the gene pool
Reply With Quote
  #6  
Old 06-15-2008, 07:17 AM
Fr. Frank Fr. Frank is offline
Senior Member
 
Join Date: Oct 2003
Location: Shalimar, Florida
Posts: 2,265
Default Re: Trailer for 20 ft Seafari

Rollers with an electric winch is the most versatile, and you can use any ramp, while drive-on aluminum frame is the easiest loading, but may reduce the number of ramps available for your use.
__________________
Common Sense is learning from your mistakes. Wisdom is learning from the other guy's mistakes.

Fr. Frank says:
Jesus liked fishing, too. He even walked on water to get to the boat!

Currently without a SeaCraft
(2) Pompano 12' fishing kayaks
'73 Cobia 18' prototype "Casting Skiff", 70hp Mercury
Reply With Quote
  #7  
Old 06-18-2008, 05:35 PM
mrburnsjr mrburnsjr is offline
Junior Member
 
Join Date: Jul 2004
Location: MA
Posts: 2
Default Re: Trailer for 20 ft Seafari

Guys,

Thanks for all of the great information. Really appreciate it. I'll have to post some pics real soon.
Reply With Quote
  #8  
Old 06-23-2020, 11:31 AM
JUST JOHN JUST JOHN is offline
Recovered
 
Join Date: May 2017
Posts: 158
Default

Do the above recommendations still ring true a dozen years later? I want to see what's out there, and at what cost...
Reply With Quote
  #9  
Old 06-23-2020, 03:29 PM
SailorChlud SailorChlud is offline
Recovered
 
Join Date: Jan 2017
Posts: 359
Default

Yes. I use a 5Star roller trailer with my Seafari. I have the torsion single axle model, 3000lb capacity. For some reason my torsion axle seems to be noisier than other report, but that is my only complaint. I never power load, always winch on, and can easily load and unload single handed. It does not perfectly level the boat, but I am not super fussy about that, as I frequently launch from a ramp on a river with 90 degree current to the ramp.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:43 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft