Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Performance
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-14-2009, 12:40 AM
kenkurek kenkurek is offline
Junior Member
 
Join Date: Mar 2009
Location: Saint Augustine FL USA
Posts: 1
Default propellor pitch for 25 seafari i/o

Can anyone tell me if I would benefit from a 4 blade prop, I currently run a mirage 19p 454cu in mercruiser i/o WOT 4350 rpm @39kts. I am primarily concearned about mid range cruise (25kts) and fuel economy. Any help would be greatly appreciated.
Reply With Quote
  #2  
Old 03-14-2009, 11:44 AM
Dilligaf Dilligaf is offline
Senior Member
 
Join Date: Feb 2008
Location: Va Beach,VA
Posts: 288
Default Re: propellor pitch for 25 seafari i/o

uh oh you better post some pics ..... another 25seafari? post pics b4 people start begging
Reply With Quote
  #3  
Old 03-15-2009, 01:44 AM
Ken Kurek Ken Kurek is offline
Junior Member
 
Join Date: Sep 2002
Location: St. Augustine, FL
Posts: 12
Default Re: propellor pitch for 25 seafari i/o

here are some pic's [image]http://home.comcast.net/~kenkurek/site/?/photos/[/image]
Reply With Quote
  #4  
Old 03-15-2009, 02:40 AM
McGillicuddy McGillicuddy is offline
Senior Member
 
Join Date: Dec 2007
Location: 32.77 N, 117.01 W
Posts: 2,184
Default Re: propellor pitch for 25 seafari i/o

You got a perty bote mister
__________________
there's no such thing as normal anymore...
Reply With Quote
  #5  
Old 03-15-2009, 11:58 PM
seafari25 seafari25 is offline
Senior Member
 
Join Date: Oct 2008
Location: Eastern Canada...Wallace, Nova Scotia every chance I get
Posts: 237
Default Re: propellor pitch for 25 seafari i/o

Perty bote in...deeeeeed

The last time I bought a prop for the Seafari I was too busy crying over how much I payed for it to pay attention to the pitch however I don't think I would be of much help anyway as I'm about 10 mph behind already

Possibly more info is required but hopefully Fr. Frank might chime in.

Brandon

P.S Ken, PM sent re: hatch
Reply With Quote
  #6  
Old 03-16-2009, 12:29 AM
Bigshrimpin Bigshrimpin is offline
Senior Member
 
Join Date: Dec 2002
Location: Onset, MA
Posts: 2,712
Default Re: propellor pitch for 25 seafari i/o

http://home.comcast.net/~kenkurek/pwpimages/147.JPG

Don't show strick these pictures!! 454 sounds like a good match for the boat. What kind of economy are you getting with the mirage 19p at cruise?
Reply With Quote
  #7  
Old 03-16-2009, 07:16 PM
1bayouboy 1bayouboy is offline
Senior Member
 
Join Date: Jul 2006
Location: Mount Pleasant, SC
Posts: 592
Default Re: propellor pitch for 25 seafari i/o


A Merc Rev 4 really improved a boat I have it's stern heavy and the Rev 4 has great stern lft as well as holding it on plane at lower speeds.
Reply With Quote
  #8  
Old 03-17-2009, 12:24 AM
Fr. Frank Fr. Frank is offline
Senior Member
 
Join Date: Oct 2003
Location: Shalimar, Florida
Posts: 2,265
Default Re: propellor pitch for 25 seafari i/o

I like the Mirage, but some are getting better mid-range performance and economy wit 4 blades, but at the cost of a couple MPH in top end.
Rev 4, or 4B Trophy are worth a try. Better yet, contact the guys at PowerTech and ask about the OFS 4 blade.
__________________
Common Sense is learning from your mistakes. Wisdom is learning from the other guy's mistakes.

Fr. Frank says:
Jesus liked fishing, too. He even walked on water to get to the boat!

Currently without a SeaCraft
(2) Pompano 12' fishing kayaks
'73 Cobia 18' prototype "Casting Skiff", 70hp Mercury
Reply With Quote
  #9  
Old 03-20-2009, 11:03 PM
Water Rat Water Rat is offline
Senior Member
 
Join Date: Nov 2002
Location: Massachusetts
Posts: 222
Default Re: propellor pitch for 25 seafari i/o

Ken,
I have a '78 23' Sceptre with same power, a 7.4 liter (454ci), 330hp carb. engine and Bravo One drive. I'm also using a 19" Mirage Plus 3 blade. I'm curious to know what drive and ratio you have, as I seem to have roughly the same numbers as you, and wondering if a different wheel might be better.
Reply With Quote
  #10  
Old 03-21-2009, 11:52 PM
Ken Kurek Ken Kurek is offline
Junior Member
 
Join Date: Sep 2002
Location: St. Augustine, FL
Posts: 12
Default Re: propellor pitch for 25 seafari i/o

Chris:

I am also running the same prop and outdrive. I am not sure of the ratio. I thought an 18p 4 blade would do nicely with the setup we have.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:19 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft