1974 Tsunami project package deal $5000

[1bayouboy]

Fee paid through paypal : 83T912010W2115915

Added pics including an older and new one of the bracket. It's been in the weather over the winter and I haven't washed them off yet.
I included pics of the glass cloth.

As much as I really hate to do it, the time has come to sell my Tsunami project. The time to
work on it just hasn't developed. I have collected a lot of stuff over the years and done a small amount of actual work on it. I will post some pics when I can.
The boat is located in Mount Pleasant, SC.

So here's the list:

1974 23' Tsunami hull. Originally dual outboard with the 20 inch transom. I removed the motor well and the transom down to the outside skin so it's pretty much ready to put in a new transom. I kept the transom cap and have a pattern I made off the transom of a Tsunami I/O model. The floors and hatches are solid but I had intended to raise them an inch and a half. The hull is a faded red that I think would polish out. The bottom was painted with white awlgrip by the previous owner. It's been kept under a car port. It is starting to collect stuff like my shrimp poles so I need to sell it to someone that will git'r dun. I kept all the in floor boxes and you can see them in the pics.

Hermco twin outboard bracket

Either the big door console from a Seacraft 23 CC or the console from a 23 Mako, or both...

Dual axle galvanized roller trailer set up for the Tsunami with a step next to the winch to get on the bow.

A marine hatch that I intended to install over the cabin at the bow.

Enough fiberglass from my rolls to do the transom. I have whole rolls of 50" 3/4oz mat,
1208 45/45 Biax with 3/4oz mat backing, 1208 biax 9 inch wide tape, and 1708 0/90 9 inch wide tape.
What I have on hand WRT to some awlgrip fairing compound.

I would rather sell everything as an almost kit project for $5000 than try to sell it all individually.