Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #11  
Old 01-21-2010, 04:01 AM
eggsuckindog eggsuckindog is offline
Senior Member
 
Join Date: Mar 2003
Location: Tampa
Posts: 2,354
Default Re: Motors Done finally

You really should do all - honest, the problem is the labor to pull the PH and break it down - thats why I said shipping it to chris and I can get you some off that price on parts by the way, you will have seals, gaskets, crank bearings, oil pump and gear( thats the Merc booger) to add to that, parts were like 1200 or so - you still need to get somebody to pull the ph and put it back on down there. Chris will have all the stuff back on and all they have to do is hook the cables up, plug the harness in and plug the trim unit wires back up. I was there when we did mine, so I know he just bolted it on and plugged stuff in. No timing or anything needed.

I can even have the parts drop shipped from Mike down there if you find somebody to do the work. It was about 12 hrs total on mine by the way but he didn't charge for that many, that was 2 hrs pulling the damn thing off, the studs get funked up - good dude though

My rectifier was 142 so that was included, you may not need that part - I did the lower main just becasue the seals were worn but that was only $20

I also put reeds in which were 120 from CCMS in Key largo - I would call them and check them out, they do it all too. Tell them I sent you down but I think both brothers know me by my real name (Dixon Cruickshank), get a price from them too. I still owe them $12 because the one forgot to add sales tax, I have the MO to go out but they probably remember me from that - they said forget it but I wouldn't have it, its tough out there. Its actually Chris Carson Marine Service -Key largo, their big on Scream and Fly, everything is inhouse.
__________________
Any way you measure it - dumbass is expensive
Reply With Quote
  #12  
Old 01-21-2010, 10:47 AM
Blue197320 Blue197320 is offline
Senior Member
 
Join Date: Mar 2006
Location: Miami Fl
Posts: 947
Default Re: Motors Done finally

thanks dixon. i think i plan to bore all holes. im planning on pulling PH myself. when i get the boat back to my house im going to pull that head and see whats going on in that particular one. ill have to call your guys soon after that for parts. i wanted to try to rebuild myself.

have you gotten the new motor to WOT yet?
Reply With Quote
  #13  
Old 01-25-2010, 01:43 AM
eggsuckindog eggsuckindog is offline
Senior Member
 
Join Date: Mar 2003
Location: Tampa
Posts: 2,354
Default Re: Motors Done finally

no - if you do it yourself I can have Mike ship the parts direct to you I think and all the parts came from the same place
__________________
Any way you measure it - dumbass is expensive
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:12 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft