Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-10-2015, 08:14 AM
cdlong cdlong is offline
Recovered
 
Join Date: Apr 2015
Posts: 80
Default Remove stains from gelcoat

I have 5 stains that I have tried the 2 cleaners on, with scrub pad & stiff brush. One stain lifted well, the other 5 are a PIMA! Anyone know how I can remove them before I apply the floor sealer to get her shine back?
Attached Images
    
Reply With Quote
  #2  
Old 05-10-2015, 10:22 AM
otterhound otterhound is offline
Senior Member
 
Join Date: Oct 2011
Location: Shelter Island, NY
Posts: 242
Default

FSR by Davis will work well on stains like that. It's basically oxalic acid in gel form. Brush it on, leave it for a few minutes, remove with water and a sponge or brush.
Rod
__________________
The older I get the faster I was!
Reply With Quote
  #3  
Old 05-10-2015, 02:31 PM
PigSticker PigSticker is offline
Senior Member
 
Join Date: Feb 2012
Location: Boynton Beach Fl
Posts: 156
Default

Some stains can get so deep in the gelcoat that you have to sand them out, and sometimes that may not even work..
Reply With Quote
  #4  
Old 05-10-2015, 04:06 PM
erebus erebus is offline
Senior Member
 
Join Date: May 2012
Location: Cape Cod
Posts: 428
Default

Mary Kate On-and-Off.
Its our go to waterline stain remover here at the yard come haulout time.
Just dont let it drip on your galvanized trailer!



(FYI- its a combo of hydrochloric, oxalic and phosphoric acids)
__________________
Zachary

[SIGPIC][/SIGPIC]
Reply With Quote
  #5  
Old 05-27-2015, 10:55 PM
CJg8r CJg8r is offline
Junior Member
 
Join Date: Jan 2008
Location: Dunedin, FL
Posts: 9
Default

I've had good luck with snobowl toilet cleaner
Reply With Quote
  #6  
Old 05-28-2015, 12:20 AM
BigLew BigLew is offline
Senior Member
 
Join Date: Jan 2007
Location: Newburyport Area; Massachusetts
Posts: 1,364
Default

If you believe it is an iron based stain (rust stain), go with Iron-Out. Get it in your grocery store or Home Depot.

Also, You might try white vinegar first, rinsed and then go at it with baking soda.

Just a thought- no garruantees
__________________
Getting home is more important than getting there!

Plan accordingly!
Reply With Quote
  #7  
Old 05-29-2015, 05:41 AM
cdlong cdlong is offline
Recovered
 
Join Date: Apr 2015
Posts: 80
Default

Thank you!
Reply With Quote
  #8  
Old 05-29-2015, 02:12 PM
uncleboo uncleboo is offline
Senior Member
 
Join Date: Sep 2009
Location: Edenton, NC
Posts: 1,583
Default

Quote:
Originally Posted by erebus View Post
mary kate on-and-off.
Its our go to waterline stain remover here at the yard come haulout time.
Just dont let it drip on your galvanized trailer!



(fyi- its a combo of hydrochloric, oxalic and phosphoric acids)
wear a mask and have plenty of ventilation!
__________________
1975 SF18/ 2002 DF140
1972 15' MonArk/ 1972 Merc 50
http://i833.photobucket.com/albums/z...photos/SC3.jpg
Reply With Quote
  #9  
Old 05-29-2015, 06:20 PM
erebus erebus is offline
Senior Member
 
Join Date: May 2012
Location: Cape Cod
Posts: 428
Default

Quote:
Originally Posted by uncleboo View Post
wear a mask and have plenty of ventilation!
Plus heavy gloves and eye protection!!
__________________
Zachary

[SIGPIC][/SIGPIC]
Reply With Quote
  #10  
Old 05-29-2015, 06:38 PM
WaveWalker WaveWalker is offline
Member
 
Join Date: Aug 2012
Location: Fl Keys
Posts: 59
Default

Muriatic acid, spray on and rinse immediately. Do this as many times as necessary unitl stain is gone, will also remove barnacle and shells off bare bottoms. I recommend stripping any wax off the gelcoat with degreaser first so the acid will work better then re wax when done. Can be used on motor for barnacles but do it at own risk! ON then OFF immediately! Will turn bottom paint green if allowed to run on it. Used this when I worked for a popular boat detailing company in the keys. THIS is done at your own risk. Cjg8r not to rain on your parade but keep snobowl off your boat, it is an abrasive and will scratch the crap out of your paint and gelcoat.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:40 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft