Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > General

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 09-25-2009, 12:56 PM
MasterBaiter MasterBaiter is offline
Senior Member
 
Join Date: Sep 2008
Location: New Jersey
Posts: 229
Default Switch from cable to hydraulic steering

I've decided that this winters project for my 23' inboard will be to switch from the worn out cable steering to a hydraulic system. My question is which one? I know everyone has an opinion so if you would justify your preference I would appreciate it.

Thanks in advance.
Reply With Quote
  #2  
Old 09-25-2009, 01:45 PM
gss036 gss036 is offline
Senior Member
 
Join Date: Jul 2003
Location: Bellingham, Washington
Posts: 260
Default Re: Switch from cable to hydraulic steering

The only ones I have seen recently is the Sea-Star. They bought Hynautics (which my boat came with)out years ago.
__________________
Gary
Reply With Quote
  #3  
Old 09-25-2009, 02:24 PM
Old'sCool Old'sCool is offline
Senior Member
 
Join Date: Jun 2006
Location: Charleston, SC
Posts: 2,122
Default Re: Switch from cable to hydraulic steering

Sea Star with the highest ratio (fastest) pump
Reply With Quote
  #4  
Old 09-25-2009, 08:33 PM
stumpie2 stumpie2 is offline
Member
 
Join Date: Apr 2009
Location: hampton,va
Posts: 95
Default Re: Switch from cable to hydraulic steering

is it a true inboard? if it is i would save the money and the hassle. just replace the cables because your not contending with prop torque so you really dont need "power" steering. just my opinion
__________________
http://i729.photobucket.com/albums/w...ictures007.jpg
I DONT KNOW, BUT I'LL GIV'ER HELL TRYIN!!!
Reply With Quote
  #5  
Old 09-25-2009, 11:12 PM
Blue_Heron Blue_Heron is offline
Senior Member
 
Join Date: Jan 2006
Location: Gator Country
Posts: 1,416
Default Re: Switch from cable to hydraulic steering

I gotta agree with nuthinfancy. Cable versus hydraulic makes a huge difference on an outboard powered boat, but an inboard or I/O with power steering shouldn't benefit from hydraulic enough to justify the extra cost.

My $0.02
Dave
__________________
Blue Heron Boat Works
Reinventing the wheel, one spoke at a time.
Reply With Quote
  #6  
Old 09-25-2009, 11:27 PM
Fr. Frank Fr. Frank is offline
Senior Member
 
Join Date: Oct 2003
Location: Shalimar, Florida
Posts: 2,265
Default Re: Switch from cable to hydraulic steering

hydraulic on an inboard is like a stereo with great high frequency response on a Harley. You can do it, but why?
__________________
Common Sense is learning from your mistakes. Wisdom is learning from the other guy's mistakes.

Fr. Frank says:
Jesus liked fishing, too. He even walked on water to get to the boat!

Currently without a SeaCraft
(2) Pompano 12' fishing kayaks
'73 Cobia 18' prototype "Casting Skiff", 70hp Mercury
Reply With Quote
  #7  
Old 09-26-2009, 09:45 AM
Jon2002 Jon2002 is offline
Member
 
Join Date: Jul 2005
Location: Delmar, DE
Posts: 44
Default Re: Switch from cable to hydraulic steering

I converted my 23 Sceptre to hydraulic because the cable steering was worn and very sloppy. I like the feel of the SeaStar system much better than cable steering and it allowed me to install an autopilot which is great on long runs. The hardest part of the install was getting the old cable out! BTW, my boat is a Volvo I/O with power assist steering.
Reply With Quote
  #8  
Old 09-26-2009, 12:04 PM
stumpie2 stumpie2 is offline
Member
 
Join Date: Apr 2009
Location: hampton,va
Posts: 95
Default Re: Switch from cable to hydraulic steering

jon2002, the hyd.steering benefited you because of the i/o and the prop torque. in the case of the true inboard the rudder isnt effected by prop torque there for why go hyd. if i were in his situation i would go with the original setup. btw raymarine makes an autopilot system for cable steering systems.
__________________
http://i729.photobucket.com/albums/w...ictures007.jpg
I DONT KNOW, BUT I'LL GIV'ER HELL TRYIN!!!
Reply With Quote
  #9  
Old 09-29-2009, 09:26 AM
MasterBaiter MasterBaiter is offline
Senior Member
 
Join Date: Sep 2008
Location: New Jersey
Posts: 229
Default Re: Switch from cable to hydraulic steering

Nice Job!
This is exactly the dialog I was hoping for. Yes, it is a "True" inboard and prop torque is not the issue. I was hoping to eliminate any play in the steering by going hyd.
Reply With Quote
  #10  
Old 09-30-2009, 10:06 PM
Jon2002 Jon2002 is offline
Member
 
Join Date: Jul 2005
Location: Delmar, DE
Posts: 44
Default Re: Switch from cable to hydraulic steering

Change to hydraulic and you lose the slop! I never liked the feel of cable steering on any of the boats I have owned with cable. Even when new there is some freeplay. You have to decide if it is worth the money. Good luck!
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:04 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft