Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Performance

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12-24-2004, 05:40 PM
corbinj43 corbinj43 is offline
Junior Member
 
Join Date: Dec 2004
Location: W Palm Beach, FL
Posts: 11
Default Suzuki 225 4 Stroke

Just bought a new Suzuki 225 4 stroke for my 80 23cc with an armstrong bracket. Need prop suggestions if anyone is running this motor and setup.
Reply With Quote
  #2  
Old 12-24-2004, 06:52 PM
SEAFARI SEAFARI is offline
Senior Member
 
Join Date: Feb 2002
Location: Long Island, NY
Posts: 265
Default Re: Suzuki 225 4 Stroke

They use those new 16" dia. Props. A 16x20 is
a good starting point with that gear ratio.
Keep us posted on performance numbers when
she's broken in.

Rodney
Reply With Quote
  #3  
Old 12-25-2004, 06:02 PM
corbinj43 corbinj43 is offline
Junior Member
 
Join Date: Dec 2004
Location: W Palm Beach, FL
Posts: 11
Default Re: Suzuki 225 4 Stroke

Thanks for the suggestion. Really looking forward to seeing how this engine will do. Replacing a 97 200 Rude. Should see a big difference in fuel flow at least. Will post performance and fuel flows when I get them.
Reply With Quote
  #4  
Old 12-27-2004, 08:24 AM
SECF3114M73J SECF3114M73J is offline
Senior Member
 
Join Date: Nov 2002
Location: mystic,ct.
Posts: 188
Default Re: Suzuki 225 4 Stroke

16x20 sounds like a lot of prop to me. My 23 has a 225 OptiMax and I'm running a 15 1/2X 17 . Trial and error is the only way to know for sure.
Reply With Quote
  #5  
Old 12-27-2004, 07:29 PM
ocuyler ocuyler is offline
Senior Member
 
Join Date: May 2002
Location: 44.41 -75.79
Posts: 1,490
Default Re: Suzuki 225 4 Stroke

jlc,

Are you at all conserned about the 100 pound difference in weight between your old and new? Your thoughts please.
__________________
Otto
And yes, I still believe in the four boat theory...
Reply With Quote
  #6  
Old 12-27-2004, 10:12 PM
warthog5 warthog5 is offline
Senior Member
 
Join Date: Jan 2004
Location: Pensacola,Fl.
Posts: 789
Default Re: Suzuki 225 4 Stroke

QUOTE: My 23 has a 225 OptiMax.
That Suzuki is geared much lower than a OptiMax.

Suzuki is 2.29:1 (Two-stage Reductin Gear]

OptiMax is 1.75:1

That's why the Suzuki's have as good or better holeshot than a 2stroke. Other 4 strokes don't have it near that low of gear ratio. [Yamaha or Honda]
Reply With Quote
  #7  
Old 12-27-2004, 11:05 PM
corbinj43 corbinj43 is offline
Junior Member
 
Join Date: Dec 2004
Location: W Palm Beach, FL
Posts: 11
Default Re: Suzuki 225 4 Stroke

Otto,
Yes I am concerned about the weight!!! My Armstrong bracket has 450 lbs of floation I heard, but my old 200 rude rides pretty low in the water. I sure hope I have not opened up a big problem. I won't sell the old motor until I know for sure. I got way to good a deal on the Suzuki not to buy it.
Reply With Quote
  #8  
Old 12-31-2004, 05:01 PM
Dunk Dunk is offline
Junior Member
 
Join Date: Dec 2004
Location: South Jersey
Posts: 16
Default Re: Suzuki 225 4 Stroke

Another thing is Suzuki's prop pitch's are not comparable to the real world pitches. The 16" props may be different, but their V6 14-15" props are about 3" high. A 14.25 x 20" Suzuki prop will run exactly the same RPM's as a 17" Stiletto or any other brand's 17" pitch.. If the dealer is suppling that 16 x 20" wheel make you test it with the load you normally carry before you let them walk away from it.
Reply With Quote
  #9  
Old 12-31-2004, 11:40 PM
warthog5 warthog5 is offline
Senior Member
 
Join Date: Jan 2004
Location: Pensacola,Fl.
Posts: 789
Default Re: Suzuki 225 4 Stroke

Any idea's why that is Dunk? If you were picking an aftermarket prop, would you go with the Stiletto's as opposed to another brand?
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:35 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft