|
|
|||||||
| View Poll Results: Are you interested in a splashwell for a 20 MA | |||
| No |
   
|
7 | 63.64% |
| Yes. I don't need fancy gel coat. |
  
|
1 | 9.09% |
| Yes, and I want gel coat |
  
|
3 | 27.27% |
| I would pay more for epoxy and/or foam core and or carbon. |
  
|
1 | 9.09% |
| Multiple Choice Poll. Voters: 11. You may not vote on this poll | |||
 |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#31
06-14-2021, 08:02 PM
|
|||
|
|||
Some pictures. Almost done. Finally.
Twill and uni carbon with divyncel H80 core and Mertons vinylester epoxy. Cross posted in the Hermco splashwell mold thread. I may pull a "pretty" part then offer up the mold. This one is 8lbs. 
|
|
#33
06-14-2021, 09:39 PM
|
|||
|
|||
|
I can, but this is specific to a master angler, unless that gap and tall cap fits another boat? I expect that I am not interested in going into production. VE resin is $75 a gallon, and I am too old for this. I started the plug a long time ago- maybe 2013? It looks like you have a 23 footer? I have a 20 foot MA.
|
|
#35
06-15-2021, 07:51 AM
|
|||
|
|||
That makes more sense! That mold might be good for 3-4 more parts. After I clean up this one, we should talk.
|
|
#36
07-02-2021, 06:20 AM
|
|||
|
|||
|
So the mold needs a doable tweak. It’s a long story but I forgot about the step in the cap. I ground it to fit but it could use tuning. Still, it works great and there is no perception of lost space due to the toe kick area. Gel coat had clumps so this has texture. I may sand and refinish if/when I redo the decks and cap.
|
|
#37
07-11-2021, 10:01 PM
|
|||
|
|||
|
If anyone local wants my old flat splashwell gate, let me know.
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
