|
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
78 20ft Master Angler - what to do about recessed handrail
This handrail is in good structural shape but the finish has dulled. Can it be polished or I was this thinking about having shorter ones about 4ft long made for each side out of stainless. Many of them have been eliminated on pictures I see.. Any ideas. These were were often very handy on the 23' I had.
|
#2
|
|||
|
|||
Paint it and buy the better attachments that contender and other manufactures use on their cc's
strick
__________________
"I always wanted to piss in the Rhine" (General George Patton upon entering Germany) |
#3
|
|||
|
|||
T & C metals Has the stands that the later Seacraft’s and Makos used (along with a lot of other stuff in there marine section of there catalog ).The stands are much smoother than the originals there is also a End stand that you can use like I did so I didn’t have to fight the tight bend at the bow of my 23
|
#4
|
|||
|
|||
Thanks
|
Thread Tools | Search this Thread |
Display Modes | |
|
|