#1
|
|||
|
|||
Finally a smart decision
A while back I was on the fence about getting my tank cleaned or replacing it. It had heavy varnish from sitting up for years. For once I listened to the collective wisdom here on the forum and replaced the tank. Here's what I found when I cut it open. This was after several DIY attempts to clean & flush.
|
#2
|
|||
|
|||
What is that????
Seeing that I am really motivated to replace mine also |
#3
|
|||
|
|||
Fuel is the devil...
strick
__________________
"I always wanted to piss in the Rhine" (General George Patton upon entering Germany) |
#4
|
|||
|
|||
When in doubt.... Change it out.
__________________
[b]The Moose is Loose ! |
#5
|
|||
|
|||
yep, the only way to truly clean a tank out 100% is to cut it open and clean then weld it back. Or if you go threw the trouble of removing it...Just replace with new.
__________________
Current SeaCraft projects: 68 27' SeaCraft Race boat 71 20' SeaCraft CC sf 73 23' SeaCraft CC sf 74 20' SeaCraft Sceptre 74 20' SeaCraft CC sf |
Thread Tools | Search this Thread |
Display Modes | |
|
|