|
|
#1
10-02-2006, 02:19 AM
|
|||
|
|||
20\" or 25\" shaft for 20ft w/bracket
  Here are a few pics of 25" shaft motors on 20sf's. The engines appear to be jacked up high. Do you guys think a 20" shaft motor would be better suited for a 20 footer with a bracket. 
|
|
#2
10-03-2006, 07:35 PM
|
|||
|
|||
|
Re: 20\" or 25\" shaft for 20ft w/bracket
Bigshrimpin, I'm not an expert on performance, but my experiences with brackets on small boats has told me to keep the powerhead as high above the water as possible. I do agree that they look a little funny however i think that they stay drier. I know that you are in the process of building your own bracket, is that going to be a flotation bracket? If so maybe it will keep the stern up high enough so that it will not be an issue.
__________________
If it isn't deer season I'd rather be in a SEACRAFT
|
|
#4
10-05-2006, 11:11 PM
|
|||
|
|||
|
Re: 20\" or 25\" shaft for 20ft w/bracket
That's a DF-140. You can tell by the Spoiler on the top/aft of the cowl.
|
|
#5
10-06-2006, 04:21 PM
|
|||
|
|||
|
Re: 20\" or 25\" shaft for 20ft w/bracket
Ha Warthog
Them’s are sure little props on them 140”s Beautiful boat. FellowShip _______________________________________________ My motto: Just for the Grins 
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
