Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > For Sale

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-20-2002, 03:58 PM
BacDoc BacDoc is offline
Junior Member
 
Join Date: May 2002
Location: Vero Beach Fl USA
Posts: 29
Default Wanted:25" shaft for Honda 130

Currently have a 1971 20' SeacCraft with 1999 Honda 130 with 20" shaft. I am going to close the transom and mount the motor on a floatation brackett and have been advised that a 25" shaft is necessary. Will trade or buy to get the right combo.
Reply With Quote
  #2  
Old 05-20-2002, 11:28 PM
Scott Scott is offline
Senior Member
 
Join Date: Feb 2002
Posts: 1,272
Default Re: Wanted:25" shaft for Honda 130

BacDoc

Have you looked into an extension kit for that motor???

I'm in a similar situation in that I want to go to 30" from 25". There is a company in Ohio (I think) called Bay Manufacturing that makes these kits (marinesurplus.com has them). Its basically a 5" housing extension with extensions for the shift and drive shaft. I talked to my mechanic about this and he has used them before with great success. The kit alone is about $500 and they require a mechanic to install for warranty purposes. It can be installed/assembled when a water pump is changed.

Now that being said my motor is alot older and I plan on replacing it soon, but this will get me through for now (If I were to get a motor at this point I wouldn’t need the boat .... because someone will have killed me [img]images/icons/shocked.gif[/img] ).

I dont know what, if any, are the ramifications of extending a Four Stroke. The people at Bay manufacturing did tell me that in there 20+ years of manufacture they have not had any issue with this kit. To tell you the truth I was really expecting push back from the mechanic that this is not a good thing to do.
Reply With Quote
  #3  
Old 05-21-2002, 12:15 PM
BacDoc BacDoc is offline
Junior Member
 
Join Date: May 2002
Location: Vero Beach Fl USA
Posts: 29
Default Re: Wanted:25" shaft for Honda 130

Thanks, I will check into bay manufacturing or marine surplus. The parts from Honda are over 1500.00 so 500 is closer to my budget. If the cost is too high I might have to abort plans for the bracket and just do a notched transom. It seems seaworthy now and I have been fishing the boat heavily (the kingfish and cobia bite has been awesome this year) but there is a soft spot by the top starboard motor mount.
Reply With Quote
  #4  
Old 05-22-2002, 01:33 AM
Scott Scott is offline
Senior Member
 
Join Date: Feb 2002
Posts: 1,272
Default Re: Wanted:25" shaft for Honda 130

BacDoc

Here’s the link to that site.....but I didn't see Honda listed [img]images/icons/confused.gif[/img] [img]images/icons/mad.gif[/img] ....I think I would give them a call to see what your options might be....maybe they haven’t listed the motor yet…….they are really great to talk to.

I got that same story from Mercury close to $2,000 for a new lower unit.....definitely not worth it on an older motor like mine!!!!! That’s how I found these guys

GOOD LUCK!!!!

http://www.baymfg.com/index.htm

Here’s that other link….don’t know where I got marine surplus from???

http://www.marineparts.com/
Reply With Quote
  #5  
Old 05-22-2002, 10:45 AM
BacDoc BacDoc is offline
Junior Member
 
Join Date: May 2002
Location: Vero Beach Fl USA
Posts: 29
Default Re: Wanted:25" shaft for Honda 130

Scott,
Thanks for the link, unfortunately they do not have parts for Honda. There is a local dealer that has a motor repaired under a warranty claim - same size and year as mine. He will not swap because the motor belongs to Honda, but he will sell it. I am reluctant to sell mine as it has been well maintained, but that is probably my best option.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:37 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft