20' 1972 Seacraft potter hull and material to finish

[billythekid]

well, things have been very hectic for me lately and I am not going to have time in the near future to finish.

1972 20' potter 4 stringer hull.

what has been done

composite transom has been installed little glass work to finish

boat was soda blasted and all bottom paint has been removed also bilge area was blasted to clean it up

all foam was cut and placed to raise stringers 2"

gunnel cap was glassed and filled to make an even 6" all the way around

hull was cored and glassed with 1708 and a layer of mat.



material and parts included

55 gallon drum of resin ( about 48 gallons left)

gallon of mekp

roll of stitch mat

roll of regular mat

3/4 divinycell scrim foam for floor more than enough for the floor

2 sheets of 1/2" divinycell 4'x8' rigid foam

2 sheets of 3/4" divinycell 4'x8' rigid foam

1 sheet of 1" divinycell 4'x10' rigid foam

1/2" of 2" foam left from stringers enough to build lateral bulkheads

7 gallons of divilette putty

5 gallons of polyfair fairing compound


console out of a 18 sf

I know there is more stuff I will look in the morning

here is the link to the work done



http://www.classicseacraft.com/commu...ad.php?t=24262



need trailer to pick up. everything can load into boat except drum of resin which I can fork into a pick up truck

3k

have about 5k into it.

I will leave it exclusive to CSC for a couple days before I throw it to the open market!

Pm or email

[email protected]



Payment Sent (Unique Transaction ID # 1XH77256RD2484455