Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Performance
FAQ Community Calendar Today's Posts Search

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 02-28-2009, 05:28 AM
Bigshrimpin Bigshrimpin is offline
Senior Member
 
Join Date: Dec 2002
Location: Onset, MA
Posts: 2,712
Default Re: Performance on a 20cc with a 200 Yamaha ox66

Quote:
When I first seatrial my 20cc w/ DF140 Suzuki after putting on the bracket, I was running a 20" pitch Power Tech prop and hit 47 kts- 54 mph. Light load with two people, and it was chine walking The hole shot sucked, and only turning 5000 rpm. I now run a 18P prop because I wanted a decent hole shot with heavy loads (30 gal bait well, or full load of scuba gear/tanks). Tops out at 40 mph @ 6000 rpm. I may be a little under proped, but for Sebastian Inlet, I really wanted some low end "get up and go".

Lloyd
http://www.go-fast.com/Prop_Slip_Calculator.htm

2.38ratio
20 pitch prop
5000 rpm

= 40mph with no slip
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:33 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft