New awlgrip paint job, but not a Seacraft tho

[flyingfrizzle]

I know its not a seacraft or even a boat but since it was primed with awlgrip marine products i thought i would share a few pictures. I had a bunch of awlgrip epoxy primer that I bought at a local marine product store at 50% off that was going out of business so I put it to use. Been working on my car a while so the boats have took a back seat the last few weeks. Car was sanded down to bare metal and primed with two part epoxy high build and skimmed with epoxy fairing compound. Spent a while sanding and blocking it down till I got it close to true. Just got a few coats of 545 awlgrip final primer on her and managed to paint the jamms with base color. I have ordered a party tent (16×32) that I am making into a paint booth to spray in. Once I get the car sprayed, I will get back on the 25 seafari. Plans are to get the bracket finished and installed then paint that hull in the home made paint booth next. I will post some pics of the paint booth once I get it fabed up. Also what are you guys using for supplied air that paint in enclosed areas? I was looking at a unit off ebay for $359 that has a filtered supply pump and a full mask with 50 foot of air supply hose. Don't want to take any chances spraying the urethane in a booth, that stuff is deadly.