Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > General

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-28-2012, 09:03 PM
mrobertson mrobertson is offline
Senior Member
 
Join Date: Sep 2008
Posts: 172
Default Oil tank location

On a 20 SF - where do most of you guys have your oil tanks mounted? Inside the console or in one of the transom boxes?

I have room in either, trying to decide which is the smartest place.


Mike
Reply With Quote
  #2  
Old 05-28-2012, 10:19 PM
Joe R Joe R is offline
Senior Member
 
Join Date: Jun 2003
Location: Smithville NJ
Posts: 390
Default

Mine is under console been there for 11 years all ok...

The rear hatch area can get wet ,my dealer that put on my motor said best spot on my 20 cc was under the console

Joe R.
20ft Classic SeaCraft
1970 Potter
__________________
Joe R
Reply With Quote
  #3  
Old 05-29-2012, 08:15 AM
mrobertson mrobertson is offline
Senior Member
 
Join Date: Sep 2008
Posts: 172
Default

Thanks Joe -

Thats what i wanted to hear. I have plenty of room in either location.

How often do you spill oil inside your console when you try to fill your tank?
Reply With Quote
  #4  
Old 05-29-2012, 04:42 PM
eggsuckindog eggsuckindog is offline
Senior Member
 
Join Date: Mar 2003
Location: Tampa
Posts: 2,354
Default

Quote:
Originally Posted by mrobertson View Post
Thanks Joe -

Thats what i wanted to hear. I have plenty of room in either location.

How often do you spill oil inside your console when you try to fill your tank?
Mine is in the rear box - console is for clean stuff - good point
__________________
Any way you measure it - dumbass is expensive
Reply With Quote
  #5  
Old 05-29-2012, 05:48 PM
wattaway2 wattaway2 is offline
Senior Member
 
Join Date: Oct 2011
Location: Ft.Lauderdale,Fl.
Posts: 611
Default

my old 20 had it mounted under the cc front seat
Reply With Quote
  #6  
Old 05-29-2012, 11:15 PM
Mikem8560 Mikem8560 is offline
Senior Member
 
Join Date: Apr 2011
Location: Charlotte Harbor Florida
Posts: 577
Default

My oump
Was on operational Nd had damaged the motor when i got it So after rebuilding the motor i premix and removed the tank it was in the port transome box. I built a 6 gal baitwell instead dor the spot Rather then rebuilding the old floor well
i thought if i buy a new motor i could put the oil tank in the floor well
would that be a working spot gravity wouldnt be a factor would it ?
__________________

82 seacraft 20SF

Bayview Canvas

Last edited by Mikem8560; 05-29-2012 at 11:18 PM.
Reply With Quote
  #7  
Old 04-04-2014, 08:40 PM
CHANCE1234 CHANCE1234 is offline
Senior Member
 
Join Date: Mar 2003
Location: Cape Cod
Posts: 903
Default

Old thread I know but hoping for so e related help. I'm moving the oil tank from the starboard aft seat storage to under the console. The engine is a 115 yamaha. Do you think the pump is powerful enough to move oil from here to the engine tank? I'm guessing it's about 15 feet the way the hose has to run. Thanks. Also any yamaha guys know the part number for this hose and what length it comes in?
Reply With Quote
  #8  
Old 04-04-2014, 08:53 PM
Billpotter Billpotter is offline
Member
 
Join Date: Sep 2012
Location: South Florida
Posts: 51
Default

We've had a Yamaha Precision Blend oil tank under the front of the console on our 18 Sea Craft since rigging it with a new 130 in 2000- no troubles, and the oil pump likes the dry location- no contamination or oil pump issues in 600+ hours. I set it up in the center between two batteries in boxes oriented for and aft so that the fill cap was accessible for replenishment without a funnel from the front of console seat hatch, but there is space in front of the batteries/ oil tank for safety gear, tools, spares, etc- I'd do it the same again.
__________________
Bill Potter

18' 1978, Yamaha 130
23' CC 1986, T Suzuki F115s (current full custom project)
Reply With Quote
  #9  
Old 04-04-2014, 09:11 PM
CHANCE1234 CHANCE1234 is offline
Senior Member
 
Join Date: Mar 2003
Location: Cape Cod
Posts: 903
Default

Good to know. Thanks. Now I need to find the oil hose in the length I need. Any ideas on that? I found the part number but it does not say how long it is.
Reply With Quote
  #10  
Old 04-05-2014, 06:15 AM
Old'sCool Old'sCool is offline
Senior Member
 
Join Date: Jun 2006
Location: Charleston, SC
Posts: 2,122
Default

I moved mine under the cosole also. It's a lot easier to access the small, inline filter there.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:21 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft