Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12-11-2018, 12:50 PM
rcoster38 rcoster38 is offline
Recovered
 
Join Date: Dec 2018
Posts: 40
Default Stock transom height on '78 20SF?

Hi all,

About to get started on my first Seacraft restore on my '78 20SF.

First off, this site is incredible. I can't tell you how much I've learned just by studying up on all of the info here, so thank you all for that.

My first question (of probably many more to come): I'm trying to decide what to do with my transom. It feels solid as a rock, although there are some minor cracks in the gelcoat that have me wondering. It's a 25" transom, and from what I can tell from research, the Potters originally had 20” transoms. Wondering if the 25" means it's been rebuillt at some point (which would explain why it's so solid and why the gelcoat work looks like it might not be a factory job) or if Potter was making 25" transoms in '78. I have a lot of other work lined up for the winter and I'd rather not replace the transom, especially since it feels solid and will probably be a bear to remove
Reply With Quote
  #2  
Old 12-11-2018, 09:09 PM
ricknewman ricknewman is offline
Senior Member
 
Join Date: Jun 2009
Location: Eastern Shore, Va
Posts: 164
Default

I don't know what year they started but if it's 25" and ain't broke, why fix it?
Reply With Quote
  #3  
Old 12-12-2018, 10:19 AM
rcoster38 rcoster38 is offline
Recovered
 
Join Date: Dec 2018
Posts: 40
Default

Quote:
Originally Posted by ricknewman View Post
I don't know what year they started but if it's 25" and ain't broke, why fix it?
Basically my thought process is if it's a 40 year old transom, I might as well rebuild it this winter while she's all torn up. If it's a 10-ish year old transom, I might as well leave that project for another day and shrink the scope of work for this winter so that I can go boating this spring. I'd like to potentially put a full transom, bracket, and repower at some point, but that does not fit in the budget or time schedule right now.

will drill some test holes this evening and see what comes out
Reply With Quote
  #4  
Old 12-11-2018, 09:18 PM
Bigshrimpin Bigshrimpin is offline
Senior Member
 
Join Date: Dec 2002
Location: Onset, MA
Posts: 2,712
Default

1977 was the first year of 25" shaft OMC motors. Merc's first 25" shaft was in 1977 too.

https://issuu.com/garzonstudio/docs/evinrude-1977
Reply With Quote
  #5  
Old 12-12-2018, 01:38 PM
DonV DonV is offline
Senior Member
 
Join Date: Jul 2004
Location: Apollo Beach or Islamorada
Posts: 3,488
Send a message via ICQ to DonV
Default

Remember!! From my experience 90% of transom failures, wet transoms, are screw holes not properly sealed. Keep that in mind as you drill.
Reply With Quote
  #6  
Old 12-12-2018, 03:56 PM
Capt Terry Capt Terry is offline
Recovered
 
Join Date: Jan 2015
Posts: 573
Default

Hey rcoster38
If the wood from your exporatory holes isnt obviously wet, put in a baggy and out in the sun to see if moisture appears. Then even if damp and want to do a full transom, try a deflection test to see if you can postpone the redo. I put jackstands under the aft end of the trailer hooked to the car. Mounted some wood rods into wood blocks sitting on the driveway with the end of the rods near but not touching the transom. Then bounced up and down on the AV plate and observed the change in the gap between the rod and transom.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:40 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft