1976 Restored 23' Inboard

[heynow2203]

Boat IS For sale PENDING COMPLETION.
1976 Master Angler 23' Inboard Restored From the hull up
* New Decks (Pensky Board)
* New Transom (Core Cell )
* Gunnels Re cored ( Marine Plywood )
* Redid foam in stringers 3lbs
* New Engine Bed (Douglass Fir)
* Awl Craft 2000 Ice Blue hull sides
* Awl Craft 2000 Oyster White inner linner
* Gel coated oyster White Bottom with Duratech Clear
* 5 Swivel Rod Holders
* Pop up Cleats
* Accon Bow Light LED
* Perko Hawse Pipes
* Perko vented fuel fills
* 2- 52 Gallon Aluminum Fuel Tanks
* All new thru-hulls
* New Taco Rub Rail
* New Stainless Strut 1.5"
* New Teleflex 2.4 rear mount helm with ram
* New Racor Fuel Water Seperator
* New Perko Water Strainer 1.5"
* All New Anchor Brand wiring
* All New Circuit Breaker Panel
* Brand New Romarine Pilot House
* All New Hinges
* LED Courtesy Lighting
* LED Spreader Deck Lights
* 2 New 1200 gph Automatic bilge pumps
* High Water Alarm
* Raw Water Wash down System
* Brand New Michigan DQX Nibral Propeller
* Brand New 1.5" Stainless Shaft
* The Engine is a 2003 Yanmar 6lp-dtze 300hp with 430hrs
* The transmission is a new take out wich is a ZF/ Hurth 630A 1.56:1
There Will Be More Details To come this is just whats here right now Price will come when complete and survey has been done and engine has been surveyed buy Yanmar Tech And Sea Trialed
Pics will be available when complete otherwise look at my rebuild thread to see the progress over the last year and a half.

If Interested Pls PM Me or Call me at (508)801-8004

[bgreene]

Originally Posted by heynow2203

Boat IS For sale PENDING COMPLETION.
1976 Master Angler 23' Inboard Restored From the hull up
* New Decks (Pensky Board)
* New Transom (Core Cell )
* Gunnels Re cored ( Marine Plywood )
* Redid foam in stringers 3lbs
* New Engine Bed (Douglass Fir)
* Awl Craft 2000 Ice Blue hull sides
* Awl Craft 2000 Oyster White inner linner
* Gel coated oyster White Bottom with Duratech Clear
* 5 Swivel Rod Holders
* Pop up Cleats
* Accon Bow Light LED
* Perko Hawse Pipes
* Perko vented fuel fills
* 2- 52 Gallon Aluminum Fuel Tanks
* All new thru-hulls
* New Taco Rub Rail
* New Stainless Strut 1.5"
* New Teleflex 2.4 rear mount helm with ram
* New Racor Fuel Water Seperator
* New Perko Water Strainer 1.5"
* All New Anchor Brand wiring
* All New Circuit Breaker Panel
* Brand New Romarine Pilot House
* All New Hinges
* LED Courtesy Lighting
* LED Spreader Deck Lights
* 2 New 1200 gph Automatic bilge pumps
* High Water Alarm
* Raw Water Wash down System
* Brand New Michigan DQX Nibral Propeller
* Brand New 1.5" Stainless Shaft
* The Engine is a 2003 Yanmar 6lp-dtze 300hp with 430hrs
* The transmission is a new take out wich is a ZF/ Hurth 630A 1.56:1
There Will Be More Details To come this is just whats here right now Price will come when complete and survey has been done and engine has been surveyed buy Yanmar Tech And Sea Trialed
Pics will be available when complete otherwise look at my rebuild thread to see the progress over the last year and a half.

If Interested Pls PM Me or Call me at (508)801-8004

Was this project done as a " fix and sell " or did you decide not too keep after all that work ?

[heynow2203]

I have decided to sell when its completed for a growing family started. This project before kids now I have a two year old another due in january so a CC just isnt going to cut it with the wifey

[ScottM]

Originally Posted by heynow2203

This project before kids now I have a two year old another due in january so a CC just isnt going to cut it with the wifey

Kinda makes you wish you kept the Sceptre, eh?

[bgreene]

How's this differ from the Sceptre ?

[DonV]

Originally Posted by bgreene

How's this differ from the Sceptre ?

Mr. Greene, a suggestion. Go the the bottom of the page, click on Classic Seacraft home, then go the SeaCraft galleries and you can check out all the differences in most all the SeaCraft models. For more info go to specifications. Good luck!

[bgreene]

Originally Posted by DonV

Mr. Greene, a suggestion. Go the the bottom of the page, click on Classic Seacraft home, then go the SeaCraft galleries and you can check out all the differences in most all the SeaCraft models. For more info go to specifications. Good luck!

Know the differences, not sure how I thought it was other design, thanks

[gofastsandman]

Originally Posted by heynow2203

I have decided to sell when its completed for a growing family started. This project before kids now I have a two year old another due in january so a CC just isnt going to cut it with the wifey

Get a bucket. Get one of Capt. Gucci`s toilet seat inserts in engine turned gold leaf.

Get a dodger. Keep that damn boat!

Ask yourself a question. No regret.

Cheers,
GFS

[fishahn]

yep, agree, bought a cc 1 month before my now 8 yr old son was born, now also have a 3 yr old daughter, they all love it!! nothing wrong with a cc and kids!

[Blackfin26]

Phil, I echo the above recommendations. However, if you interested in getting the Sceptre back let me know. The only thing that's changed is a put a nice Loadrite under it!