Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 07-25-2006, 10:29 PM
dearl dearl is offline
Junior Member
 
Join Date: Jul 2006
Posts: 15
Default Stringer problems!

I opened the floor up on my 72 GW and I have termites, bad! I can already see replacing all the stringers out to 8' from the transom! I am removing the inboard so i can pprobably beef up everything to handle what i plan on powering this boat with. Whats everyones opinion on what to use to rebuild stringers with? I want to get pics of everything before i go any further, so I'll get some stuff posted soon.
Reply With Quote
  #2  
Old 07-26-2006, 10:56 AM
FELLOW-SHIP FELLOW-SHIP is offline
Senior Member
 
Join Date: Feb 2002
Location: Cooper City, Fl
Posts: 1,798
Default Re: Stringer problems!

A 34 yr old boat is a 34 yr old boat and stuff like that happens. I don’t think that what material you use will make a difference unless you plan on keeping her another 34 years letting her rot away around you and not taking care of her like the previous owner.

If I needed to do a stringer job I would use foam filled glass because of the weight. You can buy them pre made (saw a episode on ship shape tv about them) or you could make your own like the other thread on this repair page – “foam filled stringer grid”.
I hope you check out all the other parts of the boat that was laminated with wood and replace them all. Remember “when is doubt rip it out”
Is there a Grady sight that might be able to give you more that just general suggestions??? I would want to talk to someone that knows Grady’s if I could.

FellowShip

_______________________________________________

My motto: Just for the Grins
Reply With Quote
  #3  
Old 07-31-2006, 02:36 AM
Bigshrimpin Bigshrimpin is offline
Senior Member
 
Join Date: Dec 2002
Location: Onset, MA
Posts: 2,712
Default Re: Stringer problems!

Dearl - Why did you chose to restore an old lapstrake Grady White? You're about to dump thousands of dollars and hundreds of man hours into something with very little resale value. Just trying to make you think hard about your decision before you totally commit. There are much better boats out there for little money in much better condition. Make sure you're not taking on too much of a project . . . personally . . . I'll never do another big fiberglass project boat again. A transom or a spot repair in the deck or floor - that's my limit. Beyond that it's just too expensive.
Reply With Quote
  #4  
Old 08-01-2006, 02:03 PM
dearl dearl is offline
Junior Member
 
Join Date: Jul 2006
Posts: 15
Default Re: Stringer problems!

I like the body style, mostly the siding, And i wouldn't be restoring this boat if i were going to sale it, but for my personal use i prefer this boat, it just makes me feel comfortable, and mostly because it was almost free. Don't know anyone who would pass up a free boat even if it is a Grady. Personally I like it, and will use it for many years to come
Reply With Quote
  #5  
Old 08-01-2006, 09:38 PM
Bigshrimpin Bigshrimpin is offline
Senior Member
 
Join Date: Dec 2002
Location: Onset, MA
Posts: 2,712
Default Re: Stringer problems!

Dearl - If you like it . . . that's all that matters. Most boat owners sell change boats every 4-5years. Don't fool yourself. That boat isn't free . . . coosa transom, floor, stringers, new gas tank (probably recore the deck - upside down work in the cabin) . . . materials will cost 4k easy (acetone, sandpaper/discs, brushes and rollers, dust masks (or filters for respirator) . . . that stuff adds up. When you look at the "free boat" and attach a 4thousand dollar price tag to it and 600hrs of hard (but fun) labor . . . if it still seem like a good deal then it's your boat.

When you attach a new suzuki to the back with rigging, steering, etc . . . the boat has now cost you 20K . . . what can you buy with 20K and put in ZERO hours of hard labor?

There are some real nice 23's in the for sale section.
Reply With Quote
  #6  
Old 08-05-2006, 11:44 PM
newboater newboater is offline
Member
 
Join Date: Jun 2004
Location: Egg Harbor Township, NJ.
Posts: 43
Default Re: Stringer problems!

Wouldn't these questions be beter answered on a site just for Grady White's ???????
__________________
Frank 1972 20' Seafari
Reply With Quote
  #7  
Old 08-06-2006, 01:15 AM
BA17 BA17 is offline
Senior Member
 
Join Date: Dec 2004
Location: Ocean Isle Beach, NC
Posts: 431
Default Re: Stringer problems!

I think he just asked for advice on how to repair something, not for editorials on his choice of boats. This site has the best information from guys that have done the work. Why not seek advice from people that have taken boats from junk to showroom quality? Damn.

BA
Reply With Quote
  #8  
Old 08-06-2006, 02:45 AM
Bigshrimpin Bigshrimpin is offline
Senior Member
 
Join Date: Dec 2002
Location: Onset, MA
Posts: 2,712
Default Re: Stringer problems!

This "Free boat" cost me $1500+ in Materials. It was only 13ft long. My point is that I could have bought a new 14ft aluminum or carolina skiff for $2000 and saved myself hundreds of hours (and a lung). I never planned to sell this boat either, but I got married, moved cross country and bought a seacraft. Things change and it's always wise to do a cost benefit analysis before taking on a big project like the free boat you're ripping apart. I ignored people that tried to talk some sense into me . . . but I thought I knew better.

I only got $700 for the boat and 2 year old trailer . . . when I sold it.


Reply With Quote
  #9  
Old 08-06-2006, 07:32 AM
FELLOW-SHIP FELLOW-SHIP is offline
Senior Member
 
Join Date: Feb 2002
Location: Cooper City, Fl
Posts: 1,798
Default Re: Stringer problems!

Ha Bigshrimpin

I am with you on this one. Boats are like a Woman you better be very, very sure She’s the one four you before you make the COMMITMENT.

FellowShip
__________________________________________________ ________
Just for the Grins
Reply With Quote
  #10  
Old 08-06-2006, 08:30 AM
hermco hermco is offline
Senior Member
 
Join Date: Mar 2002
Location: Jensen Beach, FL
Posts: 827
Default Re: Stringer problems!

Quote:
Boats are like a Woman you better be very, very sure She’s the one four you before you make the COMMITMENT.

Does that mean you can just sell her at a loss when you decide she's not the right one?
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:29 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft