|
#1
|
|||
|
|||
Anyone else run a 23 with a Suzuki 350?
I searched and found a couple old posts of a 23 repowered with a 350 Suzuki. Anyone else run one? I would like the good the bad. Yes I know the lower units are expensive and so are the props. My boat has a double floatation stoner bracket and I have rebuilt every part with lighter and stronger composites. The fixed and variable CG has been moved forward 14-18” and the floor has been raised 2.5”.
Thank! |
#2
|
|||
|
|||
Hummmm.......a 300 is perfect, Merc, Yami or Zuke, why the Zuke 350 with it's reliability issues?
|
#3
|
|||
|
|||
If you're referring to the lower unit seal leaks, those issues were fixed a while ago, the newer 350's are enjoying a well deserved reputation for reliability, power and quietness. I have several friends with these engines and, even those that had the leaking issues which were resolved by the factory, are putting a lot of trouble-free hours on their engines.
__________________
Boatless again! |
#4
|
|||
|
|||
So, if you're talking about new motor, any words of wisdom on the availability of motors. Figured I'd get in line. I'm only looking for a 225 or 250 though.
|
Thread Tools | Search this Thread |
Display Modes | |
|
|