Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > Recovered Threads

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12-04-2014, 05:58 PM
pair of jacks pair of jacks is offline
Senior Member
 
Join Date: Feb 2003
Location: nj
Posts: 266
Default T-Top Skins

My boat still has the original fabric t-top cover from when bought new in 2001. Lots of small holes starting to develop. Could probably get another season out of it but I'm considering converting to a thin, lighweight hardtop "skin". Does anyone have any experience with these or suggestions for who makes them? I'm leery about going to a standard fiberglass top because of weight considerations on a 21' boat. Thanks
Reply With Quote
  #2  
Old 12-04-2014, 07:55 PM
flyingfrizzle flyingfrizzle is offline
Senior Member
 
Join Date: Sep 2012
Location: Eastern NC
Posts: 1,653
Default

Quote:
Originally Posted by pair of jacks View Post
My boat still has the original fabric t-top cover from when bought new in 2001. Lots of small holes starting to develop. Could probably get another season out of it but I'm considering converting to a thin, lighweight hardtop "skin". Does anyone have any experience with these or suggestions for who makes them? I'm leery about going to a standard fiberglass top because of weight considerations on a 21' boat. Thanks
Most are built custom. You might also have to modify the t top to make it where it will bolt on right but not a issue just additional cost. I am worried about weight big time on my 25' seafari and want a hard top. I am building mine out of biaxial carbon fiber with corecell or similar foam as a core. I figured that I can do one at about a 1/3 of a standard fiberglass wood core type. Carbon cost a lot but you can find it on close outs online for cheaper than some s-glass. With the way the deep vee on the 25' is weight is a serious issue but your boat should handle it better.
__________________
Current SeaCraft projects:
68 27' SeaCraft Race boat
71 20' SeaCraft CC sf
73 23' SeaCraft CC sf
74 20' SeaCraft Sceptre
74 20' SeaCraft CC sf
Reply With Quote
  #3  
Old 12-04-2014, 08:18 PM
Blue_Heron Blue_Heron is offline
Senior Member
 
Join Date: Jan 2006
Location: Gator Country
Posts: 1,416
Default

Quote:
Originally Posted by pair of jacks View Post
I'm considering converting to a thin, lightweight hardtop "skin"...
So, from your description, I'm seeing a thin laminate in lieu of canvas. I've never seen what you're describing, but the idea is intriguing.

You could take the canvas off your T-top and use it as a pattern to lay up a couple layers of 1808 with gelcoat on the top side and then drill holes in the same locations as the canvas, add grommets just like the canvas, and install it with nylon line, just like the canvas. It should be durable as long as there aren't any hard points that it would be stretched over, and it would be really simple to make. Is that what you're thinking?
__________________
Blue Heron Boat Works
Reinventing the wheel, one spoke at a time.
Reply With Quote
  #4  
Old 12-04-2014, 09:10 PM
pair of jacks pair of jacks is offline
Senior Member
 
Join Date: Feb 2003
Location: nj
Posts: 266
Default

So, from your description, I'm seeing a thin laminate in lieu of canvas. I've never seen what you're describing, but the idea is intriguing.

You could take the canvas off your T-top and use it as a pattern to lay up a couple layers of 1808 with gelcoat on the top side and then drill holes in the same locations as the canvas, add grommets just like the canvas, and install it with nylon line, just like the canvas. It should be durable as long as there aren't any hard points that it would be stretched over, and it would be really simple to make. Is that what you're thinking?
__________________


No, actually I was thinking of a very thin hard top which would be adhered to the tower permanently not using the nylon line & grommets. I realize this would have to be custom made and I've seen some boats with these tops- just looking for someone in NJ area to consult with and get an estimate- don't know who does this kind of thing.
Reply With Quote
  #5  
Old 12-05-2014, 09:26 AM
DonV DonV is offline
Senior Member
 
Join Date: Jul 2004
Location: Apollo Beach or Islamorada
Posts: 3,488
Send a message via ICQ to DonV
Default

So you would eliminate the present T-top "outer frame" and not do as Dave mentioned, substitute a thin solid top in place of the canvas? To custom make a solid T-top which would
mount on the legs of your present structure is going to be quite the project.

Google "T-top pictures", there is a lot to look at for ideas.
Reply With Quote
  #6  
Old 12-05-2014, 11:58 AM
dave s dave s is offline
Recovered
 
Join Date: Feb 2014
Posts: 137
Default

Alumapole company used to make a plastic material called Pro-Trim, to replace the ttop canvas; much more durable and lightweight.
They also made hats and fly line buckets out of the stuff.
Probably similar materials out there.
Easier than molding a top out of glass and foam.
Reply With Quote
  #7  
Old 12-05-2014, 05:04 PM
bigeasy1 bigeasy1 is offline
Senior Member
 
Join Date: Jul 2006
Location: western massachusetts
Posts: 1,048
Default

Quote:
Originally Posted by dave s View Post
Alumapole company used to make a plastic material called Pro-Trim, to replace the ttop canvas; much more durable and lightweight.
They also made hats and fly line buckets out of the stuff.
Probably similar materials out there.
Easier than molding a top out of glass and foam.
Ditto to the above.
Our company deals with Alumapole products.We're in the scaffold rental and sales business,and we rent out the aluma pole systems.We don't deal with the marine stuff,but I remember one of our previous workers had used it on his Ctr console and liked it better than canvas.I never saw the boat,but he was very happy with it for the top.

Here's the marine side of their company.

http://www.alumapole.com/alumarinemain.html
__________________
All this,just for a boat ride
Reply With Quote
  #8  
Old 12-12-2014, 11:51 PM
martin martin is offline
Senior Member
 
Join Date: Jan 2007
Location: panama City Fl.
Posts: 1,061
Default

Quote:
Originally Posted by pair of jacks View Post
So, from your description, I'm seeing a thin laminate in lieu of canvas. I've never seen what you're describing, but the idea is intriguing.

You could take the canvas off your T-top and use it as a pattern to lay up a couple layers of 1808 with gelcoat on the top side and then drill holes in the same locations as the canvas, add grommets just like the canvas, and install it with nylon line, just like the canvas. It should be durable as long as there aren't any hard points that it would be stretched over, and it would be really simple to make. Is that what you're thinking?
__________________


No, actually I was thinking of a very thin hard top which would be adhered to the tower permanently not using the nylon line & grommets. I realize this would have to be custom made and I've seen some boats with these tops- just looking for someone in NJ area to consult with and get an estimate- don't know who does this kind of thing.
I can make you one ..it is really simple
Reply With Quote
  #9  
Old 01-04-2015, 06:45 PM
kneedeep kneedeep is offline
Member
 
Join Date: Jun 2007
Location: fl panhandle
Posts: 71
Default

this is what I did to mine. layed up with gelcoat ,mat/1708 only. i may go later and add 1/2'' nidacore to it. so far so good.http://s728.photobucket.com/user/88b...o%20hard%20top
Reply With Quote
  #10  
Old 12-06-2014, 06:23 PM
htillman htillman is offline
Senior Member
 
Join Date: Oct 2007
Location: houston, tx
Posts: 517
Default

Topsntowers in tx offered an alternative to canvas as an upgrade. It appeared to be a marine grade starbrite material. No more than a 1/4" thick, pretty flexible. Secured it by through bolting to the bow.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:27 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft