|
#1
|
|||
|
|||
seacraft savage 1978-repower
Going to repower my new to me seacraft 23 savage inboard. currently has a small block v-8. What would be the best engine/manufacture to place in this hull?
|
#2
|
|||
|
|||
Re: seacraft savage 1978-repower
What type of small block is in there now?
Ford/Chevy. What kind of transmission? Are you running in fresh or salt?
__________________
[SIGPIC][/SIGPIC] "If You Done It...It Ain't Braggin" my rebuild thread: http://www.classicseacraft.com/commu...ad.php?t=18594 |
#3
|
|||
|
|||
Re: seacraft savage 1978-repower
chevy small block, not sure what transmisson. plan to run in saltwater.
|
#4
|
|||
|
|||
Re: seacraft savage 1978-repower
Congrats stranger! heh, heh. Post some pics. Not that many out there... Photobucket is easy, but use whatever you prefer...
Good luck with her!
__________________
there's no such thing as normal anymore... |
#5
|
|||
|
|||
Re: seacraft savage 1978-repower
Repower with the same thing, unless money is not a consideration. Modern GM 5.7L small blocks can easily make 300-350 hp without undue stress on the motor. Most old ones are 260-270 hp, but that's 40 year-old technology.
You can get a crate long-block motor 350/300 hp for $2300 from Advanced Marine I think a base crate motor 350/310 hp is about $4.2K and a drop-in complete crate motor for a 350/310 hp is about $5.2K
__________________
Common Sense is learning from your mistakes. Wisdom is learning from the other guy's mistakes. Fr. Frank says: Jesus liked fishing, too. He even walked on water to get to the boat! Currently without a SeaCraft (2) Pompano 12' fishing kayaks '73 Cobia 18' prototype "Casting Skiff", 70hp Mercury |
#6
|
|||
|
|||
Re: seacraft savage 1978-repower
Ditto FF. Just make sure you have closed water cooling. It is worth the extra $$.
By getting the same thing you already have will save you big bucks. It is mho that when re powering you should at least have the tranny checked out. Worst case scenario is have it rebuild and then you are good to go.
__________________
[SIGPIC][/SIGPIC] "If You Done It...It Ain't Braggin" my rebuild thread: http://www.classicseacraft.com/commu...ad.php?t=18594 |
#7
|
|||
|
|||
Re: seacraft savage 1978-repower
Put a HEMI in it
just kidding, stay with the same block but as mentioned get loys of HP its always good, a blower set up might be good too or not
__________________
Any way you measure it - dumbass is expensive |
Thread Tools | Search this Thread |
Display Modes | |
|
|